시험패스에유효한JN0-481최신인증시험최신버전덤프샘플문제

Wiki Article

참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 JN0-481 시험 문제집이 있습니다: https://drive.google.com/open?id=1X-x8vmuCQFsVVQdFbPUITWnLv2Y2LomI

Juniper인증사에서 주췌하는 JN0-481시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. DumpTOP에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. DumpTOP덤프로 자격증취득의 꿈을 이루세요.

Juniper JN0-481 시험요강:

주제소개
주제 1
  • Apstra Design Phase: Covers pre-deployment planning elements such as reference designs, logical devices, device profiles, rack types, interface maps, and templates, including their configuration and troubleshooting.
주제 2
  • Juniper Apstra Architecture: Introduces core Apstra components including the server, device agents, and UI, along with administrative features such as RBAC, event logging, and syslog.
주제 3
  • Data Center Multitenancy: Covers multi-tenant network management through routing zones, VRFs, virtual networks, connectivity templates, security policies, VMware integration, and Data Center Interconnect.
주제 4
  • Data Center Architectures (IP Fabrics, EVPN-VXLAN): Covers spine-leaf topology design, ECMP load balancing, and underlay
  • overlay routing, along with EVPN and VXLAN concepts including route types, bridge domains, VNI-to-VLAN mapping, and VTEP functions.
주제 5
  • Intent-Based Analytics: Covers Apstra's analytics tools including Graph Explorer, graph queries, and intent-based analytics probes for network monitoring, validation, and troubleshooting.

>> JN0-481최신 인증시험 <<

JN0-481최신 인증시험 최신 인기시험 기출문제

DumpTOP는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. DumpTOP의 Juniper인증 JN0-481덤프는 업계에서 널리 알려진 최고품질의Juniper인증 JN0-481시험대비자료입니다. Juniper인증 JN0-481덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. DumpTOP의Juniper인증 JN0-481덤프를 구매하시면 밝은 미래가 보입니다.

최신 JNCIS-DC JN0-481 무료샘플문제 (Q67-Q72):

질문 # 67
You connect two single-homed servers using Juniper Apstra as shown in the exhibit. You are using the ERB design blueprint with two virtual networks in a common routing zone. In this scenario, which two types of VXLAN tunnels will be automatically created by the EVPN control plane? (Choose two.)

정답：B,C

설명：
EVPN route Type-3 is used to advertise the IP address of the VTEP and the VNIs that it supports.
This allows the VTEPs to discover each other and form VXLAN tunnels for the VNIs that they have in common. EVPN route Type-2 is used to advertise the MAC and IP addresses of the hosts connected to the VTEPs. This allows the VTEPs to learn the MAC-to-IP bindings and the MAC-to- VTEP mappings for the hosts in the same VNI. Therefore, these two types of VXLAN tunnels will be automatically created by the EVPN control plane when using Juniper Apstra with the ERB design blueprint and two virtual networks in a common routing zone.


질문 # 68
In the Juniper Apstra UI, what are two aspects that you are able to query under the Active tab within a blueprint? (Choose two.)

정답：B,D

설명：
In the Juniper Apstra UI, under the Active tab within a blueprint, operators can query real-time operational data collected from devices. This includes aspects such as ARP tables and MAC tables, which help verify active device state and connectivity in the deployed fabric.


질문 # 69
What are two types of policies that Juniper Apstra uses to push to switches using Security Policies? (Choose two.)

정답：B,D

설명：
Apstra 5.1 Security Policies are intended to enforce permit/deny controls for traffic between defined endpoints such as routing zones, virtual networks, and IP endpoints. Apstra expresses this security intent in an implementation-independent way, then renders and deploys the equivalent enforcement configuration onto the appropriate devices and interfaces. In Apstra terminology, the outcome is an ACL applied at enforcement points, such as virtual network interfaces (SVIs/IRBs) for east-west controls and border leaf interfaces for external-to-internal controls.
Therefore, the two correct policy types in this context are access control lists (ACLs) and firewall filters. "ACL" is the abstract policy object Apstra compiles and applies, while on Junos v24.4 the concrete enforcement mechanism for stateless packet filtering on interfaces is typically implemented as a firewall filter. Apstra automatically places these rendered ACLs/filters where needed: when you add VXLAN endpoints (such as expanding a rack/leaf in a VN), the ACL is placed on the corresponding VN interface; when you add external connectivity points, relevant ACLs are placed on the border leaf enforcement points. This automation ensures that security intent remains consistent as the fabric scales or changes, reducing the risk of manual rule drift. In contrast, filter-based forwarding / policy-based routing changes forwarding decisions rather than expressing permit/deny security intent, and is not the primary mechanism used by Apstra Security Policies for reachability control.


질문 # 70
In the Juniper Apstra Ul. which two resource types would be created in the Resources menu?
(Choose two.)

정답：A,B

설명：
The Resources menu in the Juniper Apstra UI allows you to create and manage various types of resources that are assigned to different elements of the network.
Resources include the following types:
- IPv4 (including Host IPv4)
- IPv6 (including Host IPv6)
- ASN (autonomous system number)
- VNI (virtual network identifier)
- VLAN (virtual local area network)
Integer (used for pool type VLAN in local pools in Freeform blueprints) Therefore, the correct answer is C and D. ASN pools and IP pools are two types of resources that can be created in the Resources menu. Bridge domain identifier (BDI) and DHCP pools are not applicable in this scenario, because they are not part of the resources types supported by Juniper Apstra.


질문 # 71
You are considering the bridged overlay EVPN-VXLAN architecture. In this scenario, how many VLANs would be enabled in the VLAN-based service type at the MAC-VRF EVPN instance level?

정답：D

설명：
In Junos EVPN, the service type determines how VLANs (broadcast domains) are mapped into EVPN constructs. With VLAN-based service, the mapping is one-to-one: a single VLAN (single broadcast domain) maps to a single EVPN instance (EVI), resulting in a separate bridge table per VLAN. When you implement EVPN-VXLAN in a bridged overlay (L2 extension over an L3 underlay), leaf devices act as VTEPs and encapsulate VLAN traffic into VXLAN using the associated VNI, but the service-type mapping rule still applies.
At the MAC-VRF hierarchy, you configure the EVPN-VXLAN parameters and choose the service type for that EVPN instance. If the service type selected is VLAN-based, then the EVI represents exactly one VLAN at that EVPN instance level. If you need multiple VLANs under the same MAC-VRF/EVI construct, Junos provides alternative service types (for example, VLAN-aware or VLAN-bundle) specifically intended to associate multiple VLANs with a single EVPN instance; that is not what VLAN-based service does.
Therefore, in a bridged overlay EVPN-VXLAN design using VLAN-based service at the MAC-VRF EVPN instance level, the correct answer is one VLAN. This remains true regardless of how many total VLANs exist across the fabric; each VLAN-based EVI handles a single VLAN.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/concept/evpn-based-services.html
https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/concept/mac-vrf-routing-instance-overview.html


질문 # 72
......

지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 이렇게 인재가 많은 사회에서 IT관련인사들은 아직도 적은 편입니다. 면접 시에도 IT인증 자격증유무를 많이들 봅니다. 때문에 IT자격증이 많은 인기를 누리고 있습니다.이런 살아가기 힘든 사회에서 이런 자격증들 또한 취득하기가 넘 어렵습니다.Juniper JN0-481인증시험 또한 아주 어려운 시험입니다. 많은 분들이 응시하지만 통과하는 분들은 아주 적습니다.

JN0-481시험대비 덤프 최신 샘플문제: https://www.dumptop.com/Juniper/JN0-481-dump.html

참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 JN0-481 시험 문제집이 있습니다: https://drive.google.com/open?id=1X-x8vmuCQFsVVQdFbPUITWnLv2Y2LomI

Report this wiki page